EBW 1.5″ 662 Product Shear Valves
$110.64 – $194.78
EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet.
- Standard 1½” openings allow minimal flow restriction and a pre-drilled test plug is included for line pressure testing
- Can be boss or U-bolt mounted.
- E-coated for corrosion protection and AGB compatibility.
- Easy-to-replace adapters slide on and off valve base without lifting the dispenser.
- Adapters are available in male, female or, union connections.
- Single poppet models stop product flow from the pump. Double poppet models stop flow from the pump and dispenser piping.
- Fusible link closes poppet at 165.0 ºF (73.9 ºC).
- Top and body material: E-coated cast iron
- Poppet and O-ring: Fluorocarbon
- Stem and poppet spring: Stainless steel
Approvals/Certifications
- Meets NFPA 30A requirements.
- UL and ULC listed. UL 842A and 842B approved for E-85 alcohol/gas blends and Biodiesel.
- ATEX approved, SIRA 13ATEX9035U.
Dimensions
NFPA Warning
- Annually test auto shut-off. Electrical supply to the submersible pump must always be disconnected before servicing meters, dispensers or emergency shut-off valves. Do not apply more than 50 psi to valve with poppet in its closed position. Valve seat and disc damage may occur.
| Weight | 10 lbs |
|---|---|
| Dimensions | 8 × 5 × 4 in |
| Connection Type | Union, Female, Male |
| Poppet | Single, Double |
| Thread | NPT, BSPT |
Related products
-
OPW 61SOC Coaxial Overfill Prevention Valve
$816.90Add to cartDownload Spec Sheet Materials Valve Body: Cast aluminum Float: Nitrile rubber, closed cell foam Valve: Aluminum Seals: Viton® Upper & lower drop tube: Aluminum Plastic parts: Acetal Hardware: Stainless steel
-
OPW 1711T Vapor Recovery Cap
$37.14Add to cartDownload Spec Sheet The OPW 1711T Vapor Recovery Cap is for use with the OPW 1611AV, 61VSA, 1611AVB and 1611VR Adaptors. The 1711T is installed on the vapor recovery adaptor, when not in use, to prevent vapors from escaping and to prevent water, dust and debris from entering the tank. Constructed of Duratuff® to help prevent …
-
OPW 61SALP Swivel Adaptor
$219.44Add to cartDownload Spec Sheet Pressure decay testing of underground storage tank systems has identified the joint between the tight-fill adaptor and the nipple or tank riser as a persistent leak point. The 61SA Swivel Adaptor mates with 4″ top-seal delivery elbows and features a top section that rotates with hose movement while the bottom section remains securely …
-
OPW 633TC Tight-Fill Top-Seal Coaxial Adaptor
$66.83Add to cartOPW coaxial vapor recovery fittings provide an easy, inexpensive means to convert existing conventional 4″ underground storage tank fill pipes to coaxial vapor recovery installations when Stage I Vapor Recovery is required. Normally, little or no digging or breaking of concrete is necessary. Simply remove existing tight-fill adaptor and drop tube (if installation is so equipped), and insert an OPW 61TC Coaxial Drop Tube and the 633TC Adaptor. The OPW 633TC Adaptor is designed to mate with a coaxial delivery elbow
