FloTech Checkmate Overfill & Retain System, 7 Compartment
$3,089.99
Use
- Overfill & Retain
Features
- FloTech brand overfill system kits provide everything needed to install a new overfill system on your tank. Systems include: 1 FT208 monitor, 1 FT151 overfill sensor and 1 FT152 retain sensor per compartment, cable and strain reliefs (cable glands).
- FloTech™ brand overfill system kits provide everything needed to install a new overfill system on your tank. One to eight compartment kits are available from our inventory. Systems include: 1 FT208 monitor, 1 FT151 overfill sensor per compartment, FT404 cable and FT402 strain reliefs
- The overfill detection system used on petroleum cargo tanks typically consists of a sensor mounted in each tank compartment, an onboard monitor located near the bottom loading valves and an API compatible socket. The overfill system is intended to detect a pending overfill condition inside the cargo tank compartment and signal the loading rack to close the fuel supply control valve, to prevent a spill of product. These systems are required by law as part of the bottom loading system and considered a secondary emergency shut off device. The overfill system is typically triggered when the primary metering system fails to load the cargo tank compartment with the correct volume of product.
- Manufactured to American Petroleum Institute standard API RP-1004, which allows for drop in interchange ability with other brands.
| Weight | 23 lbs |
|---|---|
| Dimensions | 24 × 24 × 24 in |
Related products
-
Mann Tek Aluminum Hose Swivel
$128.09 – $609.03Select optionsDownload Spec Sheet Features: • allows the hose to relax to it’s natural rest position while allowing freedom of movement without adding torque stress at the point of connection • simple design, low maintenance – consists of 2 body halves, ball bearings and a washer • male NPT x female NPT threaded connections • FKM … Read more
-
6200 Series Side Lever Type Drop Elbow
$294.34 – $480.75Select optionsDownload Catalog Page Materials: • cast aluminum modular construction • handle and cam arms: brass with buna gasket • bolts on inlet end: stainless steel • sight glass: acrylic with buna seals
-
Dixon 5204 API Load-Unload Valve
$270.88 – $283.60Select optionsDownload Spec Sheet Applications Used for bottom loading and unloading of petroleum tankers, Load/unload valve permits both terminal loading, and fuel unloading through the valve. Specifications Manufactured to American Petroleum Institute standard API RP-1004, which allows for positive connection to drop adapters and rack couplers such as the Dixon Bayco 5300/5400 series rack coupler. Features … Read more
-
Dixon Stainless Steel Hose Swivel
$262.81 – $1,134.40Select optionsDownload Spec Sheet Features Allows the hose to relax to it’s natural rest position while allowing freedom of movement without adding torque stress at the point of connection Simple design, low maintenance Construction Consists of 2 body halves, ball bearings and a washer
