Incon Digital Leak Detection Probe
$1,774.92
Digital inventory and leak detection probes provide accurate tank level monitoring and reporting with optional leak detection capabilities. These probes employ digital magnetostrictive position measurement technology for highly accurate tank readings.
Mitigate Static Friction
With any probe, naturally occurring static friction between the float and the probe shaft can cause the float to remain in place when the product level drops and even when it rises.Our digital probes feature a unique and innovative vibration motor mounted inside the probe head. Every 5 minutes, the vibration motor automatically pulses. This frees the floats from any static friction with the probe shaft and mitigates the negative effects static friction can have on level readings or leak detection accuracy.
Bottom Mount Installation
With no hanging installation kit needed, the probe can simply be placed in the tank riser and rested on the tank bottom.
Faster Setup
The probe automatically sends important setup data to the tank gauge eliminating manual input by technicians. This data includes:
- Gradient
- Probe type
- Length
- Serial number
Additional Features
- Models available for inventory control or inventory control with leak detection.
- Capable of precise leak detection, density measurement, and inventory monitoring.
- Suitable for use with gasoline, diesel, DEF/AdBlue®, and other manufacturer approved products.
- Bottom mounted installation for fast and simple install.
- Vibration motor integrated into probe head pulses every 5 minutes to reduce the effects of stiction on level reading and leak detection, providing readings with higher accuracy.
- Screw-in electrical connector provides quick installation or removal, eliminating the need to re-splice wires.
- Highly accurate digital communication between the probe and the tank gauge.
- Probes are available in many sizes that are suitable for all common tanks.
- Easily installed into 2”, 3” or 4” riser pipes.
- Operating temperature: -40° to 140 °F (-40° to 60 °C)
- Storage temperature: -40° to 158 °F (-40° to 70 °C)
- Non-linearity: ±0.025% of full scale
- Repeatability: ±0.001″
- Temperature sensors: 5 thermistors located in the shaft
- Temperature resolution: ±0.02 °F (±0.01 °C)
- Probe pigtail: 10′ long three conductor cables with shields and polyurethane jacket
- Compatible with up to three floats for product, water, phase separation detection, or density measurement.
- Compatible with Franklin Fueling Systems tank gauges including: TS-550 evo™, TS-5000 evo™, TS-5, TS-550, TS-5000, Colibri®, TS-1001/2011/750/504/508.
Approvals/Certifications
- UL & cUL listed, ATEX, IECEx
Applications
Digital probes feature exceptional linearity, resolution, and stability, and are used in underground and aboveground storage tanks. Two types of probes are available for the following applications:
- The leak detection probes are typically used for underground storage tanks and petroleum applications when static or SCALD leak detection is required.
- The inventory control probes are typically used for aboveground storage tanks, chemical or oil waste, or underground storage tanks that do not require in-tank leak detection.
Components
- 1. Probe head
- 2. Guides
- 3. Bottom mount fitting
- 4. Probe shaft
- 5. Product float
- 6. 2” or 4” gas, diesel or phase separation water floats
- 7. Precision or standard density float
- 8. LPG float
- 9. Chemical float
- Note: All float kits sold separately.
Operation
An electromagnetic field is created inside the probe head and forms around a long waveguide within the probe shaft when position measurements are taken. The electromagnetic field interacts with the magnetic field of the float(s) and produces a shock wave in the waveguide that travels at a known speed. When the shock wave is detected at the probe head, the probe creates a signal that corresponds precisely to the product level. Product expansion calculations are enabled by temperature sensors that are located at various points in the probe shaft.
| Weight | 50 lbs |
|---|---|
| Dimensions | 144 × 6 × 6 in |
Related products
-
FE Petro MLD+ Mechanical Leak Detectors (3-pack)
Original price was: $1,186.00.$899.50Current price is: $899.50.Select options This product has multiple variants. The options may be chosen on the product pageFE Petro™ brand MLD+ mechanical leak detectors provide precise leak detection for standard fuel and biofuel applications on 4″ submersible turbine pumps (STPs). This lineup of advanced mechanical leak detectors features reliable line leak detection capabilities and maximum product flow rates. The MLD+ features a compact, yet rugged design to reduce installation height and provide …
-
EBW Vertical Check Valve
$119.91 – $174.90Select options This product has multiple variants. The options may be chosen on the product pageDownload Catalog Page EBW vertical check valves are used on suction system fuel lines to maintain prime. Check valves are installed directly below the dispenser pumping unit. EBW offers both single and double poppet models. Double poppet models offer twice the protection from losing prime. Metal to metal poppet seating. All valves are pressure tested …
-
EBW Air Assisted 90 Degree Emergency Valve (Victaulic™)
Original price was: $800.75.$593.36Current price is: $593.36.Add to cartFFS Transport Catalog Air assisted emergency valves make product handling safer and installation more convenient. The emergency valve has a shear groove that meets 49 CFR 179.345-7. The seat of the valve is located inside of the tank shell as required by DOT regulations. One valve has the capability to be converted to either right …
EBW Air Assisted 90 Degree Emergency Valve (Victaulic™)Read More
-
EBW 664 Pressure Regulator Valve
$682.38 – $695.63Select options This product has multiple variants. The options may be chosen on the product pageDownload Catalog Page The EBW 664 pressure regulator valve is designed to be used in conjunction with suction type dispensers connected to an aboveground storage tank. The pressure regulator valve prevents fuel from flowing to the pumping unit and flowing out the vent tube of the self-contained dispenser when the pump is not activated. The …
