Mann Tek 2″ Stainless Steel Industrial Break-away Coupling Male NPT
$1,190.25
| Part Number | SBC200SSMNPT |
|---|---|
| Material | 316 Stainless Steel |
| Seal | FKM (FPM) |
| Size | 2″ |
| DN Size | 50.0 |
| Length | 7″ (178mm) |
| Width | 4.5″ (114mm) |
| Working Pressure | 360 PSI at 70°F (21°C) |
| Flow | 200 GPM (757 LPM) |
Applications
- Coupling is designed to minimize spillage and damage associated with drive away and pull away incidents.
- Typical applications: loading rack
Features
- Designed to be installed between a fixed point (pipe, pump, manifold) and a hose
- Coupling automatically senses an excessive load, closes the valves and disconnects
- High flow rate / low pressure drop
Available Options
- Also available in 150# Flange, BSP thread, DN Flange, 300# ASA Flange, Grooved Ends or any combination thereof. Consult Dixon for more information.
- Optional Non-closure Design available, consult Dixon for more information. The non-closure design is an economical alternative which allows the coupling to break away due to pull-away/drive-away incidents thus protecting piping systems and equipment. The design allows spillage of product in these instances due to the lack of valving in the coupling. Useful applications where non-hazardous product is being conveyed and where there are no environmental concerns.
How It Works
- The safety break-away valve consists of two halves, each with a valve that has an O-ring seal. When the safety break-away couplings separate, it allows the valves to close. The two valves close rapidly, minimizing exposure to personnel and the environment.
- Safety break-away couplings have three external break bolts. In the case of axial tension all of the bolts take up the force corresponding to the break force on the hose with a safety margin. Non-axial forces concentrate the tension forces more strongly on one bolt, so that the safety break-away coupling reacts in a natural way to the reduction of the hose break forces.
| Weight | 7 lbs |
|---|---|
| Dimensions | 7 × 4.5 × 4.5 in |
| Material | Aluminum, Stainless Steel |
| Size | 1", 2", 3", 4", 5", 6", 8" |
Related products
-
6200 Series Side Lever Type Drop Elbow
$294.34 – $480.75Select optionsDownload Catalog Page Materials: • cast aluminum modular construction • handle and cam arms: brass with buna gasket • bolts on inlet end: stainless steel • sight glass: acrylic with buna seals
-
Dixon Global Cam & Groove Type B Coupler x Male NPT
$7.99 – $206.71Select optionsView Catalog Page Features: • interchanges with all products produced to A-A-59326D • Buna seals standard
-
EBW Mechanically Operated 90 Degree Emergency Valve
$430.71Add to cartFFS Transport Catalog Emergency Valves make product handling safer. These Emergency Valves have a shear groove that meets 49 CFR 178.345-8. The seat area of the valve is located inside the tank shell as required by DOT regulations. This valve gives you the advantage of a faster flow rate while fitting a standard 4″ TTMA … Read more
-
EBW Flanged Vapor Check Valve
$126.16 – $178.03Select optionsFFS Transport Catalog The sight glasses featured on this vapor recovery fitting can help detect liquid accumulation in the vapor manifold of a transport. A drain plug lets any extra fuel drain out, and the poppet prevents vapors from escaping when disconnected from the hose. A low pressure drop makes flow rates faster and vapor … Read more
