Morrison Bros 9095DS 2” Overfill Prevention Valve
$514.07 – $561.29
The 9095DS valve is installed at the fill port of a storage tank. Designed for use in pressurized fill systems and requires a tight fill connection. The valve installs in a 2 inch female threaded opening of a low profile tank requiring a high level shut-off. The valve terminates the fill when the product reaches the preset level.
Standard Features
- Designed for fill applications that require a drop tube. (accepts a 1-1/2” male threaded drop tube)
- The valve design allows for full product flow until it reached the shut-off level
- The shut-off height is factory preset and is measured from the bottom of the attachment threads
- Typical flow rate is 26 GPM at 10 PSI pressure drop and 60 GPM at 60 PSI pressure drop
- 10 PSI is the minimum flow requirement for the valve to operate. The valve will not work in gravity filling applications
- Can be retrofitted to existing tanks
- Immediate and cushioned shutoff…full flow up to within 1-2 seconds of closing and no abrupt kickback or line shock when valve closes
- Dry disconnect…after shut off product is allowed to automatically drain from the highest point so fill nozzle can be removed without spilling
- Simple mechanics…minimum moving parts. Shutoff is activated by basic hydraulic principle with no springs, levers or complicated sequence leading to closure
Construction Details
- Adaptor: Anodized aluminum Part A or Part F
- Body: Anodized aluminum
- Float: Nitrophyl-N
- Plunger and dashpot: Brass
- Upper tube and float guard: Aluminum
- Linkage: Stainless steel
- Shut off mechanism: Anodized aluminum
Code Compliance
NFPA 30, 30A, UFC, IFC, PEI/RP 200, and PEI/RP 600
| Weight | 9 lbs |
|---|---|
| Dimensions | 28 × 6 × 6 in |
| Adapter | Type F, Type A, No Adapter |
| Shut-Off Height | 2", 4", 6" |
Related products
-
Morrison Bros 178 Threaded Style Fill Cap
$33.62 – $112.58Select options This product has multiple variants. The options may be chosen on the product pageDownload Spec Sheet Designed for tank filling applications where a tight fill connection is not required. Adaptor permanently threads onto riser pipe of fill nipple, cap threads onto adaptor. Standard Features Lockable with a padlock Vapor tight when properly secured Construction Details Body: Brass (BB), or cast iron (IB) (powder coated black) Cap: Brass (BC), …
-
Morrison Bros 517 3.5 Gallon AST Spill Container
$162.16 – $188.04Select options This product has multiple variants. The options may be chosen on the product pageDownload Spec Sheet Standard Features 3 1/2 gallon (13.25 liters) capacity Hinged cover is lockable with a padlock Centered connection 517 has male threaded inlet and outlet 517F has female threaded inlet and outlet 517WO includes removable screen for use as used oil collection point, male threads Construction Details Body: 16 gauge spun steel, powder coated white Cover: …
-
OPW 523V Pressure Vacuum Vent
$92.51 – $120.66Select options This product has multiple variants. The options may be chosen on the product pageDownload Spec Sheet Pressure Vacuum Vents are installed on the top of vent pipes from underground or aboveground fuel storage tanks. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris or insects. A normally closed poppet in the valve opens at a predetermined …
-
Morrison Bros 515 AST Remote Spill Container (Single Port)
$849.75 – $1,096.63Select options This product has multiple variants. The options may be chosen on the product pageDownload Spec Sheet Install Instructions The 515 Series remote spill container is a 15 gallon capacity cabinet that provides containment of small spills during tank filling operations. Standard Features 15 gallon (56.78 liters) capacity Hinged lid opens upward, is lockable, and is held open by a hydraulic arm 1″ locking drain valve 2″ top opening …
Morrison Bros 515 AST Remote Spill Container (Single Port)Read More
