OPW 200TG AST Mechanical Tank Gauge
$450.45 – $515.59
The OPW 200TG Tank Gauge is designed for reading liquid levels in horizontal or vertical aboveground storage tanks. The 200TG Tank Gauge provides an accurate numerical counter readout, eliminating the need for any on-site manual gauging.
- Vapor Tight – Allows for standard tank pressure testing and sealing up to 25-psig (1.72 bar).
- Angled Face – Improves visibility from ground on large diameter tanks. May be easily read up to 30 ft. away (9.14 m).
- Swivel Adaptor Base – Allows for 360 degrees of rotation of gauge face for easy viewing wherever needed.
- Easy Installation – 2″ NPT-threaded base reduces labor time, and comes standard with female thread. A “H11421RS” may be purchased for male thread applications.
- Corrosion-Resistant Construction – A powder-coated die cast-aluminum body assures long service life in many fluids.
- Drop Tube – Prevents float entanglement in the tank, and gives the gauge a more accurate reading when turbulence is present. (Drop Tubes sold separately. They are recommended for use in tanks with high turbulence, and where other piping and structures inside the tank may cause entanglement.)
- Float Buoyancy – Designed to float in all fluids with a specific gravity of 0.65 and greater.
- Tank Height – Unit designed for use on any horizontal or vertical aboveground tank up to 18 ft. (5.5 m) in depth. Specials available upon request.
- Numbering – Black letters on white background for ultimate contrast and better visibility. Characters stand over 1″ (25 mm) tall.
- Unit Measurement – Can be purchased in metric units to read in meters, 1/10, 1/100, or in English units to read in feet and inches.
- Maintenance – No annual maintenance required.
- U.S. Patent No.: 6,523,404 – Other Patents Pending.
- Compatible Fuels See chart
- Temperature Rating – 120ºF to -40ºF (49ºC to -40ºC)
Listings and Certifications
Underwriters Laboratory Listed – UL Listed MH29367. Liquid level gauges which are intended to be used on aboveground storage tanks and monitor the level of petroleum-based flammable or combustible fluids.
- Enclosure: Powder-coated aluminum
- Swivel Base: Hard-coat aluminum
- Float: 304 stainless steel
- Lenses: Tempered borosilicate
- Gears: Acetal
- Gaskets & O-Rings: Nitrile®
- All Hardware: Stainless steel
- Accuracy: + or – 2″
| Weight | 9.5 lbs |
|---|---|
| Dimensions | 10 × 10 × 9 in |
| Length | 0 – 18 ft, 0 – 40 ft |
Related products
-
Morrison Bros 1618 Mechanical Vertical Tank Gauge
$897.06 – $1,242.60Select options*Tank brackets (1618–0167 AB) sold separately Download Spec Sheet The 1618 mechanical tank gauge is designed for vertical tanks up to 50’ in height and provides a readout in feet and inches at ground level. Features and Details 30’+ line of sight viewing distance Easy to read from wide viewing angle Easy to install with single vertical …
-
OPW 23 Series Open Atmospheric Vent
$26.33 – $54.70Select optionsDownload Spec Sheet Pressure Vacuum Vents are installed on the top of vent pipes from underground or aboveground fuel storage tanks. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris or insects. A normally closed poppet in the valve opens at a predetermined …
-
Morrison Bros 691 Full Port Ball Valve
$9.45 – $529.72Select optionsDownload Spec Sheet Standard Features Quarter turn operation Full port for maximum flow and minimum pressure drop Can be operated in partial open position for flow control Double seal allows the valve to be operated in both directions Blowout proof stem Construction Details Body: Forged brass Ball: Hard chrome plated Seal: PTFE
-
Morrison Bros 818 Clock Gauge
$386.41Select optionsDescription Standard Features Construction Description The Morrison “clock gauge” displays the liquid level reading of product stored in an aboveground tank. Measures the liquid level up to a maximum of 12 feet in height. Gauge face displays level reading in feet and inches. The hour hand (short hand) displays the number of feet and the …
