SPRAY&GO® Moss, Mold, Mildew & Algae Stain Remover
$47.00
SPRAY&GO® Stain Remover – Easily cleans stains from most surfaces. Just spray on, let dry and you’re done – without any rinsing or scrubbing. Just thoroughly wet the dry surface with SPRAY&GO and then forget about it. The elements (wind and rain, etc.) will slowly wash off the stain. With SPRAY&GO, surfaces requires no pressure washing, scrubbing or rinsing.
SPRAY&GO is effective on surfaces such as: concrete, natural stone, ceramic, asphalt, painted surfaces, siding (vinyl, aluminum), textured finishes, and wood. The solution contains no bleach, abrasives, hard acids or phosphates. One gallon of SPRAY&GO concentrate makes 6 gallons, or 24, 32-ounce applications.
How it works: Just thoroughly wet the DRY surface with SPRAY&GO and then forget about it. Once treated with SPRAY&GO, the surface requires no pressure washing, scrubbing or rinsing. The elements (wind and rain etc.) will slowly wash off the stain. If the surface to be treated is not fully exposed to rainfall or is vertical, some assistance may be required to remove stains.
Effective on:
- concrete
- pool surroundings
- patio furniture (except cushions and wood frames)
- natural stone
- roofs (asphalt and fiberglass shingles, clay and concrete tiles)
- ceramics
- asphalt driveways
- painted surfaces
- siding (vinyl, aluminum)
- textured finishes
- play equipment (slides, plastic gyms)
- wood decks.
SPRAY&GO ADVANTAGES:
- Easy – Simply spray & go, with no scrubbing
- Effective – Removes tough stains from most surfaces
- Safe – Contains no bleach, abrasives, hard acids or phosphates
- Long lasting clean – Stays clean longer
| Weight | 8 lbs |
|---|---|
| Dimensions | 6 × 6 × 12 in |
| Size | 18 lb, 8 lb |
Related products
-
Dixon Universal Spill Kit
$37.08 – $54.76Select options This product has multiple variants. The options may be chosen on the product pageDownload Spec Sheet Features Easily stored behind a seat or in a storage compartment Includes 10 pads (15″ x 19″), 3 socks (3″ x 4′), 2 disposal bags with ties and 1 pair of Nitrile gloves
-
Gasoila® Free All® Deep Penetrating Oil
Original price was: $14.99.$7.99Current price is: $7.99.Add to cart11 oz. Aerosol, Penetrates rust, scale and corrosion to free parts and assemblies INSTANTLY!
-
Seraphin 20 Liter Stainless Steel Calibration Can
Original price was: $917.00.$875.00Current price is: $875.00.Add to cartCALIBRATION TYPE
Factory CALIBRATION by standards traceable to National Institute of Standards and Technology CONSTRUCTION METHOD
Built to OIML R-120, N.I.S.T. Handbook 105-3 Standards and API Manual of Petroleum Measurement Standards Chapter 4 DESIGN
Reinforcing bands to prevent distortion of prover when full with liquid and when being transported. GAUGE ASSEMBLY
Equipped with a (liquid -level) gauge tube mounted on the side of the neck GRIP
Rubber grip on test measure handle MATERIAL
TYPE 304 STAINLESS STEEL NOMINAL CAPACITY
20 Liters – calibrated “to deliver” at 15 Deg C NOMINAL DIAMETER
11 inches NOMINAL HEIGHT
26 inches REQUIRED SCALE RANGE
± 200 milliliters. The gauge scale shall be graduated both above and below the nominal capacity graduation by an amount not less than 1.5 % of the test measure SCALE RESOLUTION
10 MILLILITERS WEIGHT (DRY)
15 LBS. TOLERANCE
0.02% Scale Accuracy VOLUME INDICATION
ALUMINUM GRADUATED SCALE BOTTOM
Concave and of adequate thickness to prevent distortion when filled. -
5 Gallon Stainless Steel Calibration Can
Original price was: $971.00.$873.85Current price is: $873.85.Add to cartThe Seraphin® Series E test measure is manufactured of type 300 stainless steel. It is available in any capacity from 5 liters (1 US Gallon) to 40 liters (10 US Gallons). Typical sizes are listed in the specification sheet, however custom capacities are available. Seraphin® no longer manufactures terneplate test measures (see news and events). …
