EBW 1.5″ 662 Product Shear Valves
Price range: $110.64 through $194.78
EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet.
- Standard 1½” openings allow minimal flow restriction and a pre-drilled test plug is included for line pressure testing
- Can be boss or U-bolt mounted.
- E-coated for corrosion protection and AGB compatibility.
- Easy-to-replace adapters slide on and off valve base without lifting the dispenser.
- Adapters are available in male, female or, union connections.
- Single poppet models stop product flow from the pump. Double poppet models stop flow from the pump and dispenser piping.
- Fusible link closes poppet at 165.0 ºF (73.9 ºC).
- Top and body material: E-coated cast iron
- Poppet and O-ring: Fluorocarbon
- Stem and poppet spring: Stainless steel
Approvals/Certifications
- Meets NFPA 30A requirements.
- UL and ULC listed. UL 842A and 842B approved for E-85 alcohol/gas blends and Biodiesel.
- ATEX approved, SIRA 13ATEX9035U.
Dimensions
NFPA Warning
- Annually test auto shut-off. Electrical supply to the submersible pump must always be disconnected before servicing meters, dispensers or emergency shut-off valves. Do not apply more than 50 psi to valve with poppet in its closed position. Valve seat and disc damage may occur.
| Weight | 10 lbs |
|---|---|
| Dimensions | 8 × 5 × 4 in |
| Connection Type | Union, Female, Male |
| Poppet | Single, Double |
| Thread | NPT, BSPT |
Related products
-
OPW 1611 Series Vapor Recovery Adaptor
Original price was: $213.97.$147.99Current price is: $147.99.Add to cartDownload Spec Sheet The OPW 1611AV and 1611AVB are poppeted adaptors, designed to mate with a vapor recovery elbow, for returning gasoline vapor to the tank truck during a fuel delivery to an underground tank. Materials Body: Clear anodized aluminum or cast bronze Stem: Chrome-plated steel Stem Guide: Acetal resin Spring: Stainless steel Gasket: Nitrile®
-
OPW 61SALP Swivel Adaptor
Original price was: $317.45.$219.44Current price is: $219.44.Add to cartDownload Spec Sheet Pressure decay testing of underground storage tank systems has identified the joint between the tight-fill adaptor and the nipple or tank riser as a persistent leak point. The 61SA Swivel Adaptor mates with 4″ top-seal delivery elbows and features a top section that rotates with hose movement while the bottom section remains securely …
-
OPW 634LPC Low Profile Top-Seal Fill Cap
Original price was: $178.98.$123.99Current price is: $123.99.Add to cartDownload Spec Sheet The OPW 634LPC Low Profile Top-Seal Fill Cap is designed for tight installations where the clearance between the top of the fill adaptor and the underside of the spill container cover is limited. The rugged iron lever provides a positive cam-action that seats the cap firmly in the adaptor groove for a …
-
OPW 633T Top-Seal Adaptor
Original price was: $116.68.$80.99Current price is: $80.99.Add to cartDownload Spec Sheet OPW 633T Top-Seal Adaptors thread onto the fill pipe of underground storage tanks, and are designed to mate with top-seal delivery elbows. Use OPW 634TT, 634TE or 634TTP Top-Seal Caps with 633T Adaptors. Tight-Fill Top-Seal Adaptors are installed in spill containment manholes on the fill riser pipe from an underground fuel storage …
