Mann Tek 5″ Aluminum Industrial Break-away Coupling Male NPT
$3,660.55
| Part Number | SBC500ALMNPT |
|---|---|
| Material | Aluminum |
| Seal | FKM (FPM) |
| Size | 5″ |
| DN Size | 125.0 |
| Length | 13.8″ (351mm) |
| Width | 10.6″ (269mm) |
| Working Pressure | 230 PSI at 70°F (21°C) |
| Flow | 1100 GPM (4154 LPM) |
Applications
- Coupling is designed to minimize spillage and damage associated with drive away and pull away incidents.
- Typical applications: loading rack
Features
- Designed to be installed between a fixed point (pipe, pump, manifold) and a hose
- Coupling automatically senses an excessive load, closes the valves and disconnects
- High flow rate / low pressure drop
Available Options
- Also available in 150# Flange, BSP thread, DN Flange, 300# ASA Flange, Grooved Ends or any combination thereof. Consult Dixon for more information.
- Optional Non-closure Design available, consult Dixon for more information. The non-closure design is an economical alternative which allows the coupling to break away due to pull-away/drive-away incidents thus protecting piping systems and equipment. The design allows spillage of product in these instances due to the lack of valving in the coupling. Useful applications where non-hazardous product is being conveyed and where there are no environmental concerns.
How It Works
- The safety break-away valve consists of two halves, each with a valve that has an O-ring seal. When the safety break-away couplings separate, it allows the valves to close. The two valves close rapidly, minimizing exposure to personnel and the environment.
- Safety break-away couplings have three external break bolts. In the case of axial tension all of the bolts take up the force corresponding to the break force on the hose with a safety margin. Non-axial forces concentrate the tension forces more strongly on one bolt, so that the safety break-away coupling reacts in a natural way to the reduction of the hose break forces.
| Weight | 16 lbs |
|---|---|
| Dimensions | 14 × 11 × 11 in |
Related products
-
Dixon® Cam & Groove Type A Adapter x Female NPT
$13.72 – $312.15Select optionsDownload Dixon Cam & Groove Catalog
-
EBW Air Interlock with Limit Switch
$164.50 – $179.88Select optionsFFS Transport Systems Catalog Ensure proper vapor recovery every time by using the Air Interlock with Limit Switch. With the limit switch, bottom loading cannot begin until a vapor recovery hose is connected to the vapor check valve. The switch does its job by breaking a connection in the secondary over-fill prevention system, thus preventing … Read more
-
EBW Six-Way Air Valve
$106.33 – $140.79Select optionsFFS Transport Systems Catalog These air interlock valves were designed to operate two different air systems at the same time. The lightweight valves are designed to lock the trailer brakes and open the air operated vapor valve at the same time. These six-way air valves can be used in the normally open (N/O) and normally … Read more
-
EBW Three-Way Air Valve
$77.62 – $99.11Select optionsFFS Transport Systems Catalog Play it safe with this lightweight valve that locks up the brakes on the trailer, preventing it from leaving the loading rack while connected to the loading arm. This three-way air valve can be used normally open or normally closed, has an adjustable stem, and comes with standardized TTMA and API … Read more
