Morrison Bros 9095AA 2” Overfill Prevention Valve
$810.53 – $1,147.53
Application
The 9095AA 2” series overfill prevention valve is designed to prevent overfilling
storage tanks by providing a positive shut-off during a pressurized fill.
Features
• Installs directly onto a 4” riser or top mounted spill container
• Minimum shut-off height is 2” from the tank top
• 2.35” of float height adjustment
• Drop tube adaptor accepts 2” drop fill tubes (Morrison 419)
• Full flow to shut-off point, cushioned closure eliminates shock
• Integral pressure relief
• Integral anti-siphon function
• Optional test mechanism
Materials of Construction
• Direct fill adaptor…passivated aluminum
• Remote adaptor…ductile iron, powder coated
• Shaft, linkage and hardware…stainless steel
• Lower pipe nipple…e-coated steel
• Drop tube adaptor…passivated aluminum
• Body…passivated aluminum
Operational Criteria
• Minimum 5 PSI flow requirements
• Maximum operating pressure is 100 PSI
• Maximum viscosity of 300 centistokes
• A tight fill connection is required for the valve to operate
• The estimated flow rate is 230 GPM at 10 PSI pressure drop (See flow curve)
Code Compliance
ULC-S661-10 listed, NFPA 30, 30A, UFC, IFC, PEI /RP200, PEI/RP 600,
Florida DEP EQ-851, and California EVR models available
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Configuration | 2” male quick disconnect x 4” female threads, 3” male quick disconnect x 4” female threads, 2” female threads x 4” female threads CARB-EVR, 3” female threads x 4” female threads CARB-EVR, 2” dry disconnect x 4” female threads CARB-EVR, Valve less adaptor |
Related products
-
OPW 623V Pressure Vacuum Vent
$134.43 – $155.91Select optionsDownload Spec Sheet Pressure Vacuum Vents are installed on the top of vent pipes from underground or aboveground fuel storage tanks. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris or insects. A normally closed poppet in the valve opens at a predetermined …
-
Morrison Bros 179 Hinged Style Fill Cap
$12.90 – $37.48Select optionsDownload Spec Sheet Designed for tank filling applications where a tight fill connection is not required. Threaded body installs onto riser pipe or directly into tank bung. Standard Features Easy to open and close hinged operation Positive stop to prevent cover from contacting tank Lockable with a padlock Integrated venting when closed
-
Morrison Bros 691 Full Port Ball Valve
$9.45 – $529.72Select optionsDownload Spec Sheet Standard Features Quarter turn operation Full port for maximum flow and minimum pressure drop Can be operated in partial open position for flow control Double seal allows the valve to be operated in both directions Blowout proof stem Construction Details Body: Forged brass Ball: Hard chrome plated Seal: PTFE
-
OPW 821 Solenoid Valve
$332.08 – $778.21Select optionsDownload Spec Sheet The OPW 821 Solenoid Valve is designed to prevent accidental siphoning of aboveground storage tanks if a leak or break occurs in the fuel supply line. The 821 valve is a two-way, normally closed diaphragm valve that opens when energized to allow fuel to flow to the pump or dispenser. Available in …
