EBW 1.5″ 662 Product Shear Valves
Price range: $110.64 through $194.78
EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet.
- Standard 1½” openings allow minimal flow restriction and a pre-drilled test plug is included for line pressure testing
- Can be boss or U-bolt mounted.
- E-coated for corrosion protection and AGB compatibility.
- Easy-to-replace adapters slide on and off valve base without lifting the dispenser.
- Adapters are available in male, female or, union connections.
- Single poppet models stop product flow from the pump. Double poppet models stop flow from the pump and dispenser piping.
- Fusible link closes poppet at 165.0 ºF (73.9 ºC).
- Top and body material: E-coated cast iron
- Poppet and O-ring: Fluorocarbon
- Stem and poppet spring: Stainless steel
Approvals/Certifications
- Meets NFPA 30A requirements.
- UL and ULC listed. UL 842A and 842B approved for E-85 alcohol/gas blends and Biodiesel.
- ATEX approved, SIRA 13ATEX9035U.
Dimensions
NFPA Warning
- Annually test auto shut-off. Electrical supply to the submersible pump must always be disconnected before servicing meters, dispensers or emergency shut-off valves. Do not apply more than 50 psi to valve with poppet in its closed position. Valve seat and disc damage may occur.
| Weight | 10 lbs |
|---|---|
| Dimensions | 8 × 5 × 4 in |
| Connection Type | Union, Female, Male |
| Poppet | Single, Double |
| Thread | NPT, BSPT |
Related products
-
OPW 633T Top-Seal Adaptor
Original price was: $116.68.$80.99Current price is: $80.99.Add to cartDownload Spec Sheet OPW 633T Top-Seal Adaptors thread onto the fill pipe of underground storage tanks, and are designed to mate with top-seal delivery elbows. Use OPW 634TT, 634TE or 634TTP Top-Seal Caps with 633T Adaptors. Tight-Fill Top-Seal Adaptors are installed in spill containment manholes on the fill riser pipe from an underground fuel storage …
-
OPW 71SO Overfill Prevention Valve
Price range: $639.05 through $713.71Select options This product has multiple variants. The options may be chosen on the product pageThe OPW 71SO is a vapor-tight two-stage shut-off valve. When the liquid level rises to about 95% of tank capacity, the valve mechanism is released, closing automatically with the flow. This reduces the flow rate to approximately 5 gpm through a bypass valve. The operator may then stop the filling process and disconnect and drain …
-
OPW 62TT Tight-Fill Side-Seal Cap
Original price was: $82.53.$57.99Current price is: $57.99.Add to cartDownload Spec Sheet The OPW 62TT Side-Seal Cap is designed to mate with the 61AS Side-Seal Adaptor. The cap has a lever and gasoline-resistant Buna-N gasket to help assure a positive seal. The 62TT is constructed of Duratuff®, a high-impact composite that helps eliminate rust and oxidation to assure a long, maintenance-free life. Materials Cap …
-
OPW 633TC Tight-Fill Top-Seal Coaxial Adaptor
Original price was: $131.58.$90.99Current price is: $90.99.Add to cartOPW coaxial vapor recovery fittings provide an easy, inexpensive means to convert existing conventional 4″ underground storage tank fill pipes to coaxial vapor recovery installations when Stage I Vapor Recovery is required. Normally, little or no digging or breaking of concrete is necessary. Simply remove existing tight-fill adaptor and drop tube (if installation is so equipped), and insert an OPW 61TC Coaxial Drop Tube and the 633TC Adaptor. The OPW 633TC Adaptor is designed to mate with a coaxial delivery elbow
